Is the MR44 worth it over the MR36?
On a busy floor, usually yes — the 4x4 radios hold more clients per access point, so you often need fewer units. On a lightly loaded branch the MR36 is the better value. The survey settles it.
Cisco Meraki
Cisco Meraki MR44 Access Point — Supplied and Configured in the UK
Overview
Cisco Meraki MR44 Access Point — Supplied and Configured in the UK
The MR44 is the capacity step up in the Meraki Wi-Fi 6 range — 4x4 radios for floors where the MR36 would run out of room. It fits corporate offices, hospitality and campus buildings that need throughput per access point rather than simply more access points.
meraki mr44
cisco meraki mr44
meraki mr44 access point
meraki wifi 6 access point
What the MR44 is built for
Busier indoor floors: corporate offices, hotels, conference space and campus buildings where each person carries two or three devices and video calls run all day.
- Wi-Fi 6 (802.11ax) with 4x4 MU-MIMO and OFDMA
- Dual-band operation with automated RF optimisation
- Bluetooth Low Energy, IoT radio and location analytics
- Air Marshal WIPS and Layer 7 application prioritisation
- PoE powered — we confirm your switch budget before quoting
Where it sits against MR36 and MR46
The MR44 is the middle of the three. Choose it when coverage alone is not enough but you do not need a dedicated scanning radio.
- MR36 — 2x2, general coverage, fewer clients per access point
- MR44 — 4x4, more capacity and throughput for busy floors
- MR46 — 4x4 plus a dedicated security and RF scanning radio
How we quote and deliver it
We size the estate from a survey, then quote hardware, licences, mounts and any PoE switching required to power them. Everything is staged against your dashboard organisation before it ships.
- Predictive or on-site survey against your floor plan
- Enterprise versus Advanced licensing compared on your requirements
- SSID, VLAN and policy template applied before dispatch
- UK delivery, install support and post-install RF tuning
Explore
Related Hardware and Services
Jump straight to the ranges and services buyers most often pair with this one.
- Cisco Meraki MR36 access point
- Cisco Meraki MR46 access point
- Full Meraki MR range
- Meraki licence renewal
- Cisco Meraki access points
- Request an MR44 quote
FAQs
Questions We Are Asked Most
Will our existing switches power MR44 access points?
They need 802.3at PoE+ to run at full capability. We check your switch model and power budget as part of the quote and flag any upgrade rather than leaving you to find out on install day.
Can MR44s mix with older Meraki access points?
Yes. Models across generations sit in the same dashboard network and share SSIDs and policy, so you can phase a refresh rather than swap everything at once.
Get a Quote
Tell Us What You Need
Send the models, quantities and site details and we will come back with availability, lead time and a tailored quote.
Talk to us about cisco meraki
Cisco Meraki MR44 4x4 Wi-Fi 6 access point supplied across the UK with survey, licensing, mounting and pre-staged configuration. Cloud-managed wireless for busy offices and campuses.